ADITI


Thinlabs systems have two default user accounts (user / password),
Administrator / Administrator and User / User, respectively.

Devices by default automatically log onto the User account.

VNC Password: Admin

It is highly recommended to change default passwords immediately to keep your IT environment secure.

--------------------------------------------------------------


Serial numbers of Thinlabs All-In-One Systems and Box Modules are 12 digits in length; serial numbers of ADITI Lithium Ion Batteries are 6 digits in length.

Certification stickers with serial numbers are located on the back of box client modules.

On integrated thin clients, there is a certification sticker on the back of the system;
newer models also have a 2nd serial number sticker either on the left side bezel or on the bottom of the bezel.

If the certification sticker has been destroyed, contact Thinlabs Support.

--------------------------------------------------------------

  • Turn the device OFF prior to cleaning.
  • Use any standard glass cleaner to clean the touchscreen - AVOID PRODUCTS CONTAINING AMMONIA.
  • DO NOT spray glass cleaner directly on the LCD as it could possibly leak inside a non-sealed unit and cause damage.
  • Spray glass cleaner on a cloth / towel and then clean the touchscreen. A clean microfiber cloth can also be used.

--------------------------------------------------------------


The Tablet PC Input Service may have stopped on your system.

Applies to: TL22, TL24, TLI84, TL86 models

  • Press the Start button, select Control Panel
  • Select Services
  • Scroll down to Tablet PC Input Service, right click your mouse and select Properties
  • On the General Tab:
    • Be sure that Start Type is set to Automatic
    • If the service is stopped, press Start to start the service
      (the touch screen may not yet be operational at this point)
  • On the Recovery Tab:
    • For the First Failure, Second Failure and Subsequent Failures options, select Restart the Service
  • For systems running Embedded software,
    commit changes through EWF.
  • Reboot the system. The touch screen should be working on reboot.

Registered Thinlabs users can check the status of a product by Serial Number or Invoice Number
on our Warranty Lookup page.

Select either Serial Number or Invoice Number.
Enter the corresponding information and click Lookup.

--------------------------------------------------------------


Battery performance will gradually reduce depending on number of charges of the battery.  In most cases, our battery will last over 3 years but varies on a case-by-case basis.

See the Technical Specifications of your ADITI medical cart computer product for more information.

--------------------------------------------------------------

-----

THINLABS WARRANTY AND SUPPORT IS LIMITED TO MANUFACTURING AND HARDWARE DEFECTS ONLY. Review our on-line support options, including our FAQs and Downloads first.

-----

If OEM Software does not complete a successful boot process:

  • NOTE: It is the responsibility of OEM support personnel to provide recovery media and instructions to end users.
  • Thinlabs can offer this service for OEM customers with a valid support contract.
  • After the initial system BIOS post, if OEM software (regardless of operating system) either (1) fails to load completely or (2) continuously reboots, try reloading the operating system.

OEM Software Touch screen problems:

  • When using a proprietary OS, verify that X and Y coordinates are not hard-coded so that the touch screen calibration utility can properly detect and set coordinates.  If coordinates have been hard-coded, update settings in the software as required for the specific unit.
  • If, after trying the above to remedy any issues, the thin client is still not working, please request an RMA for further support.

-----

Thinlabs reserves the right to charge standard out-of-warranty service fees when:

  • units returned fail to exhibit any problems as reported;
  • problems resolved are not manufacturing and hardware related; or
  • any problems with the thin client could have been remedied utilizing the available on-line support options provided.

--------------------------------------------------------------


Thinlabs systems have two default user accounts (user / password),
Administrator / Administrator and User / User, respectively.

Change default passwords prior to deploying systems in the field.

Devices are set to auto-logon to the local User session by default.
If you change the password or create another user, you can set the units to autologon by:

On WES 2009 (XPe):

  • Start Menu | Setup Panel | Utilities | TweakUI
  • Scroll down the menu list on the left, select Auto Logon, and set new login credentials.
  • Commit changes to the EWF using EWF Manager
    (you can also change autologon settings remotely using Thinlabs Device Manager)
On WES 7 (W7e):
  • From the Start menu search box, search forcmd
  • Right click on cmd.exe and select "Run as Administrator"
  • Type the cmd "control userpasswords2" and press <Enter>.
  • The "User Accounts" applet should open.
  • Uncheck the box "Users must enter a username and password to use this computer" and click <Apply>.
  • When prompted, enter the credentials for the user session that requires to auto logon when unit boots.
  • Commit changes to the EWF using EWF Manager.
    You can also change the autologon setting remotely using Thinlabs Device Manager)

--------------------------------------------------------------


This may be seen on systems with 2 GB RAM if the paging file is set to Disabled when installing resource-intensive applications. See the how-to document on Windows 7 - Memory Optimization for information on how to correct this error.

--------------------------------------------------------------


- Check that the USB cable from the battery to the system is properly connected.
- Check that the power meter icon is active on the lower right hand corner of the desktop.

See the ADITI Medical Cart Computer Power Bank Guide for more information.

--------------------------------------------------------------

Pages